Compro 7503 8W/20R CD-R - Page 4

More Installation!
After the theoretical part on SCSI termination and IDs, I will now continue on the installation proper. I went ahead to set the jumpers on the drive to SCSI ID 6.


Setting the jumpers

After that, I hooked up the CD-R drive to the SCSI cable and power cable. After which I finally connected the CD-R drive to the Adaptec SCSI card.


Connecting the SCSI card

I then plugged in the SCSI card and cleaned up the wires. I was now ready to rock!


Everything wired up nicely


 

8X of pure madness!

< Previous

Next

 

Content