Abit BE6-II Motherboard - Page 2

Here is what came in the sample box:

  • Motherboard
  • Manual
  • CPU stands
  • Floppy cable
  • 40-conductor IDE cable (Ultra ATA/33 IDE cable)
  • 80-conductor IDE cable (Ultra ATA/66 IDE cable) its the one with the blue connector in the middle picture
  • Ultra ATA-66 driver disk
  • Thermal sensor cable

I was missing the utilities CD-ROM but I am sure it would be in the normal retail box.



  • Supports all Intel Pentium III, Pentium II and Celeron processors that operate on the 66MHz or the 100MHz front-side bus (support for the latest processors may require a BIOS update).
  • Supports Slot 1 packaging, with support for PPGA packaging via a PPGA-to-Slot 1 adapter card (available separately).


  • Intel 440BX chipset (82443BX and 82371EB)
  • HPT366 Ultra DMA-66 IDE controller for Ultra DMA 66 support
  • Supports Ultra DMA-33 IDE protocol
  • Supports Advanced Configuration and Power Management Interface (ACPI)
  • Accelerated Graphics Port (AGP) 1x and 2x mode (Sideband)


  • Three 168-pin DIMM sockets support SDRAM modules (max 768 MB)
  • Supports ECC
  • System BIOS

CPU Soft Menu III

  • Award BIOS version 6.0
  • Supports Plug-and-Play (PnP)
  • Supports Desktop Management Interface (DMI)
  • Year 2000 compliant

Multi I/O Functions

  • 2x Bus Master IDE ports supporting up to four Ultra DMA-33/66 devices
  • 2x Bus Master IDE ports supporting up to four Ultra DMA 33 devices
  • PS/2 Keyboard and PS/2 Mouse connectors
  • 1x Floppy port
  • 1x Parallel Port (EPP/ECP)
  • 2x Serial Ports
  • 2x USB Connectors


  • ATX form factor
  • One AGP slot, five PCI slots, one ISA slot
  • Wake on LAN header
  • IrDA TX/RX header
  • SB-Link header
  • Wake On Ring header
  • Two SMBus headers
  • Hardware monitoring: Fan speeds, voltages, CPU and environment temperature (including via included thermal sensor cable)

< Previous

Next >