ABIT BX6 2.0 Motherboard - Part 2



  • Supports Pentium III 450~500MHz processor cartridge
  • Supports Pentium II 233~450MHz processor cartridge
  • Supports Celeron 266~400MHz processor cartridge
  • Supports future Slot 1 processors


  • Intel 440BX chipset (82443BX and 82371EB)
  • Supports Ultra DMA/33 IDE protocol
  • Supports Advanced Configuration and Power Management Interface (ACPI)
  • Supports AGP 66/133MHz (Sideband) 3.3V device


  • Four 168-pin DIMM sockets support SDRAM modules
  • Supports up to 1GB max (8, 16, 32, 64, 128,256MB SDRAM)
  • Has 6 chip Data Buffer set
  • ECC support

System BIOS

  • SOFTMENU II eliminates the need for jumpers or DIP switches to set CPU parameters
  • Award Plug and Play BIOS supports ACPI, APM, DMI
  • Write-Protect Anti-Virus function by AWARD BIOS
  • Year 2000 Compliant

Multi I/O Functions

  • One floppy port connector supporting up to 2.88MB floppy drive and mode 3 floppy drive
  • Two channels of bus master IDE ports connectors for up to four IDE devices (Including LS-120MB floppy drive)
  • One built-in Standard/EPP/ECP parallel port connector
  • Two built-in 16550 fast UART compatible serial ports connectors
  • Built-in PS/2 keyboard and PS/2 mouse port connectors
  • Built-in standard IrDA TX/RX header
  • Built-in two USB port connectors
  • Built-in Wake on LAN header
  • Built-in SB-Link header


  • ATX form factor
  • One AGP slot, Five PCI slots and Two ISA slots
  • Hardware monitoring - Including fan speed, voltages, system environment temperature, and Thermal header for CPU or other temperature monitoring
  • Keyboard and Mouse Wake Up

ABIT BX6 Rev 2.0 is available in a standard size box. Together with the mainboard you will get a set of IDE and floppy cables, an easy and detailed instruction manual, a CD with Intel and Xstore bus-master drivers. Also found inside is the WinBond monitoring program and two vitally important magnetic stickers looking very much like Mr Soft Jumpy.

< Previous

Next >