smartBridges smartNIC - Page 3

Specifications
Here is a breakdown of the smartNIC's specifications :

USB Interface

  • Spec. V1.1 Compliant, Series "B" connector, shielded cable, max length 5 metres.

Ethernet Interface

  • ISO8802/3, IEEE 802.3, RJ-45 connector for UTP or STP cable (Category 3 or 5), maximum length 100m. Half-Duplex mode.

Software Compatibility

  • Drivers are supplied for MS Windows 98 to support TCP/IP, IPX and NetBEUI protocols.

Data Transfer Rate

  • Average 6 Mbits/sec (Sustained).

Memory

  • 32K x 8 SRAM for IN and OUT data buffers. 1K bit EEPROM for configuration.

Operating Voltage

  • 5V (derived from USB), Active Current of 120mA.

Physical Dimension

  • 92 x 67 x 27 mm (3.6 x 2.6 x 1.1 inch), Weight of 70g (2.5 oz.).

Operating Temperature

  • 0 to 55 Degrees Celsius, Humidity of 10% to 90%.

Safety Agency Certification

  • CE Mark, EMC Emissions - FCC Class B. 

< Previous

Next >

 

Content

ble>